The construction process and installation of venee

2022-07-22
  • Detail

The construction process of the veneer is relatively simple, but some matters need to be paid attention to in the construction process, so as to ensure that the installation process is more perfect. The precautions for the veneer construction are:

1. First, pay attention to dampproof during the construction process of the veneer. Before installation, place it in a ventilated and dry place to prevent sun exposure, and the stacking must be flat; Secondly, if the sanding effect of the factory panel is not good, the dust and dirt on its surface should be cleaned with fine sandpaper before construction to ensure its smooth appearance; Again, before installing the veneer, the qualified primer must be painted on the panel surface to prevent dirt from affecting the visual effect in the process of use. Then be sure to choose qualified adhesives, and the moisture content must be qualified, so as not to affect the beauty of the panel. Finally, the walls to be decorated and decorated must be completely dry, and the damp proof course must be made. The wood used must be dry before use, so as to prevent the decorative board from being affected by moisture and discoloration

2. Brush the surface of the decorative panel with nitro varnish. After each brush, wait 30~60 minutes for the paint to dry out, and then polish the decorative panel with sandpaper again, and then paint for the second time. How to save money in decoration? Home decoration network, free design budget quotation. By analogy with the previous process, it generally requires three or more times of paint construction, so as to ensure that the surface of the veneer is bright and shiny

3. After the construction is completed, the primer needs to be painted twice, and then the pinholes left during the construction should be plastered. Strong glue can also be used to replace the nailing method. After the hole mending is completed, continue to brush five times as before, until the nail hole is completely invisible

4. After all processes are completed, protect with paper, avoid being placed in direct sunlight, and do not use it in air conditioning outlets, heating hoods, wet places, which will cause unnecessary mildew, discoloration, cracking and other problems

广州男科医院

济南男科医院

秦皇岛男科医院

Copyright © 2011 JIN SHI